Taken off of a gen 1 KTM 1290 Superduke GT that’s had minor right hand side damage. Marks on the peg as per photo. Brake lever is good usable / working order but is probably fractionally bent inwards. This is not noticeable but I can tell due to slight contact as it passes past the footrest when under tension from the spring. This will not occur when installed on the bike / bolted to the brake mechanism as it sits below. Incorporates the following KTM part numbers which would cost well over £200 from KTM to replace new. 61313050000 (now replaced by 6131305004433S) 61303039100 (now replaced by 6130303910033S)
